Movieworld Hypercoaster Canopies

Movieworld Hypercoaster Canopies

Project Details

Location: Gold Coast, QLD

Completion Date: September 2017

Size: 460sqm

Fabric: PVC Mesh - Ferrari FT381

Client: Village Roadshow Theme Parks

The Movieworld Hypercoaster Canopies project involved design, fabrication and installation of five (5) PVC “leaf-like” dark mesh canopies with a total fabric area of 460 sqm for the leaf structures and 45 sqm of wall panels.

The Brief

The purpose of the Movieworld Hypercoaster Canopies was to provide exciting and functional shade structures for patrons queing up for the DC Rivals Hyper Coaster at Movie World. The structures needed to be innovative, eye catching and allow  good views of the coaster and 3D DC character Feature Walls whilst still providing shelter. The structures needed to fit in a very specific arear along with other landscaping, pathways and loading areas.

The build also required the use of a crane to move completed structures over the roller coaster, which meant work was conducted outside of park hours to ensure minimal disruption for park visitors.

The Concept

The five Movieworld Hypercoaster Canopies comprise of porous PVC membranes supported around the perimeter with steel compression beams which create the outer shape of a leaf.

Leaf-shaped structures at Movieworld

A valley cable along the center was incorporated to develop tension through the body of the fabrics. The perimeter beams are supported with tapered rafters representing leaf veins branching from central midrib beams and supported with 2 columns along the midrib beams.

The geometry and size of the structures was heavily dictated by the landscaping of the paths while not covering vision lines of ride attractions. The design needed to be robust to be suitable for the geometry requirements of the five areas but have a commonality between the different types.

The Materials

The concept architecture required that the fabric design and colour match the theme of the ride. The choice of a dark PVC Mesh (Serge Ferrari FT381) for the Movieworld Hypercoaster Canopies was to enable maximum protection for patrons while still allowing views of both the roller coaster and the DC Character feature walls, helping to build excitement for patrons while they waited to board the ride.

Allowance was also made for lighting and speakers.

The Result

The leaf inspired design is the most striking aspect of the four structures and the early coordination with the clients was pivotal in its development to match with their existing landscaping layout and to not interfere with existing structures or any hero shots of their latest attraction.

The Movieworld Hypercoaster Canopies are visually complementary to the overall theme of the attraction, enhanced shade protection and a striking visual landmark for patrons within the park.

Project Details

Location: Gold Coast, QLD

Completion Date: September 2017

Size: 460sqm

Fabric: PVC Mesh - Ferrari FT381

Client: Village Roadshow Theme Parks